SHOWTEC Phantom 250 Spot Podręcznik Użytkownika Pobierz pdf (Strona 17)

Controlling:

After having addressed all Phantom fixtures, you may now start operating these via your lighting

controller.

Note: After switching on, the Phantom will automatically detect whether DMX 512 data is received or

not. If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.

The problem may be:

- The XLR cable from the controller is not connected with the input of the Phantom.

- The controller is switched off or defective, the cable or connector is detective, or the signal wires are

swapped in the input connector.

Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure

proper transmission on the DMX data link.

Remotely controllable functions

Colour-wheel

The Phantom contains a colour-wheel with 7 colours and one white. It is also possible to rotate the

colour-wheel continuously at different speeds ( “Rainbow effect” in both directions).

Rotating gobo-wheel

This rotating gobo-wheel has 5 metal gobos, 2 glass gobos and open.

Shutter/Dimmer/Strobe

The dimming (0-100%) is provided by a simple mechanical shutter unit. This unit may also be used for

strobe effect (1-10 flashes per second).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Brak uwag

SHOWTEC Phantom 250 Spot Podręcznik Użytkownika Strona 17